Skip to main content

Help guide

Business internet down? Safe first checks

Start by checking the impact, not the equipment. Find out who and what is affected, compare devices already on wired and Wi-Fi connections, and record what you can safely see. Do not unplug, reset or restart shared equipment as part of these checks. Contact the responsible support provider with your observations.

For workplace staff and office managers, these checks help prepare a handoff; they cannot establish the cause or restore service.

Stop and get help first

  • Immediate danger: Follow your workplace emergency procedure. If police, fire or ambulance are needed urgently, call Triple Zero (000) from a phone that can make the call. A business phone may not work during an internet or power outage. A charged mobile is an alternative, but may not connect during an outage or without available coverage. If a call cannot connect, seek another working phone or help from someone nearby when safe. See ACMA’s emergency calling guidance.
  • Smoke, a burning smell or damaged electrical equipment: Keep clear, do not touch the equipment and follow the site safety procedure. Alert the appropriate on-site safety contact.
  • Critical services affected: If an alarm, lift, clinical system, payment terminal or another essential service is affected or its status is uncertain, notify its responsible owner promptly and follow the relevant continuity procedure. Do not wait to complete this guide.
  • Suspected cyber incident: If you see a ransom demand, evidence of unauthorised access or another sign of compromise, stop ordinary troubleshooting and contact your known incident or IT lead through a verified channel. Preserve what you have observed. The Australian Signals Directorate’s reporting page explains the available reporting options.

First-response map

An outage: four safe moves

  1. Pause Stop for electrical danger, critical-service risk or suspected compromise.
  2. Scope Work out whether one person, several people or the site is affected.
  3. Observe Note timing and existing wired or Wi-Fi symptoms without changing equipment.
  4. Escalate Give the observations to the responsible support team.

If a stop condition applies, get help first; do not continue troubleshooting. Observations do not prove the cause.

Find the scope of the interruption

If none of the stop conditions apply, ask a few colleagues what they can and cannot use. Note the time the problem was first noticed, when the service last worked if known, and whether it is constant or comes and goes. Record the site and, if useful, the affected room or area. If you do not know, write “unknown”.

  1. One person or many? Is one device affected, a group in one area, or the whole site? If your business has other sites, ask whether they are affected too. Different symptoms can have different causes.
  2. Which services? On a device already in use, try a known, non-sensitive public website and an approved work application you normally use. Note whether both fail or only one. If other sites work but one application does not, report that distinction rather than assuming the internet is down.
  3. Wired or Wi-Fi? Ask someone using an existing wired connection and someone using Wi-Fi what they see. Do not unplug a cable or change a device’s connection to make the comparison. If no comparable device is available, leave this check unanswered.

If wired devices work and Wi-Fi devices do not, the Wi-Fi path is worth mentioning to support. If both fail, report both. Neither pattern proves the cause: the devices or services may not share exactly the same network path. A Wi-Fi connection symbol alone does not prove that internet access is working.

Check for a known outage

If you have a separate working connection, look for a status notice from your internet provider using a known official address. For an nbn-connected service, you can also check the nbn network status page; nbn recommends entering the full service address for the most accurate result. Note the notice and when you checked.

No notice is not proof that your connection is healthy. nbn advises contacting your internet provider if there is no detected nbn outage but your service still has a problem. Its status tool does not cover nbn Enterprise Ethernet premises and may not reflect all nbn Sky Muster Plus satellite outages. If you do not know the service type, ask your provider rather than assuming the result applies.

Handoff card

Useful information, without the secrets

  1. Where Affected site or service.
  2. When Start time, or say that it is unknown.
  3. Impact Who and what cannot work.
  4. Observed Safe symptoms and checks already completed.

Do not send passwords, one-time codes or confidential customer records.

Observe without changing anything

From a safe, accessible position, note any visible equipment light labels and their colours or whether they are blinking. Record the exact wording of a non-sensitive error message, such as “connected, no internet”, and which device showed it. Light meanings differ between devices, so report what you see rather than diagnosing a particular fault.

Do not open cabinets, disconnect or rewire cables, reset or restart equipment, or change settings. Shared services may depend on it. Leave hands-on work to authorised support. Do not send photos that expose credentials or private information.

Prepare a concise handoff

Send the responsible IT team or retail internet provider a short, factual note. Include the site, start time and time zone, scope, affected services, wired and Wi-Fi observations, visible symptoms, outage notices checked and actions already taken. Include the business impact and any essential service concern. Mark untested items as unknown and provide a verified way to reach you that is available during the outage.

Example: “North office, noticed at 9:15 am local time. Six people report that websites are unavailable on Wi-Fi. One colleague on an existing wired connection can reach a public website. Payment terminal status unknown; site manager notified. Router light labelled ‘Internet’ is blinking; colour is amber. Provider status not yet checked. No cables or settings changed.” This gives support a starting point, not a diagnosis.

Do not include passwords, one-time authentication or recovery codes, payment details or customer records. The Australian Signals Directorate’s scam advice recommends using trusted contact details and not sharing passwords or authentication codes.

Get human help and keep people informed

Contact the provider responsible for the affected service or your organisation’s authorised IT contact. If Comm Centre is your provider, check your agreement or confirm the appropriate channel with your service owner before relying on the Comm Centre Support page. If the page is unavailable or the issue is urgent, use your organisation’s verified escalation or continuity procedure instead. Do not assume a web request has been received.

Tell staff what is known, what remains unknown and who is coordinating updates. Use only workarounds approved for your workplace, especially for payments and sensitive information. The Australian Government’s business outage preparation guidance recommends maintaining alternative communication arrangements and a business continuity plan. Once services return, tell support which services are working again and which still need attention.

Sources and further reading