The short answer
Run the same speed test three ways: on a computer plugged into the network, on Wi-Fi next to the access point, and on Wi-Fi where people complain. If wired is fast and Wi-Fi is slow, it is the Wi-Fi. If everything is slow, check whether it happens at the same time each day and write it down.
The idea: test the same way, in three places
A single speed test tells you little. The same test run in three places tells you where the slowdown lives, which is what decides who can fix it.
The three-way test
- A · Plugged inA computer connected with a network cable. Tests the connection itself.
- B · Wi-Fi, closeThe same computer on Wi-Fi, in the same room as the access point.
- C · Wi-Fi, where it hurtsThe same computer where people complain.
Run it in ten minutes
Pick one test site and stick to it
YouYour provider’s test, or an independent one such as M-Lab speed test (Measurement Lab). Different sites give different numbers, so do not mix them.
Close the heavy stuff
YouPause downloads and file sync on the test computer. Leave everyone else working normally: that is the real-world result.
Test A, B and C
YouWrite down download, upload and ping (latency) each time. A laptop without a network port can use a USB adaptor for test A.
Repeat at two other times
YouEarly morning and your busiest hour. Write the times down with each result.
Note anything unusual
YouA backup running, a big video meeting, a delivery of new laptops updating at once.
Restarting the router or nbn box disconnects phones and payment terminals for everyone and a reset can wipe settings. Leave that to whoever manages your network.
Read the result
- You foundA, B and C are all slowPoints toThe connection or the plan, or something using it.NextCheck whether it is worse at busy times, and whether a backup or sync was running. Compare with your plan’s typical busy-period speed.
- You foundA fast, B fast, C slowPoints toWi-Fi coverage in that area.NextSee Business Wi-Fi dead spots: what to check before buying equipment before buying any equipment.
- You foundA fast, B and C slowPoints toThe Wi-Fi itself: an old access point, a crowded channel or too many devices.NextReport it with your written results. It is a Wi-Fi job, not an internet plan job.
- You foundOnly one computer is slowPoints toThat device: updates, a VPN, an old Wi-Fi card or a full disk.NextTest a second device in the same spot to confirm.
- You foundFine early, slow at the same time each dayPoints toBusy-hour congestion, or a scheduled backup or update.NextCheck what runs at that time. See How much internet does your business need? A bandwidth calculator that counts upload.
- You foundSpeed fine, but ping jumps aroundPoints toAn unstable line or a saturated upload.NextThis is what breaks calls. See Choppy, one-way or dropping calls: what to check and what to record.
Comparing with your plan? The ACCC’s guidance is that providers should advertise each nbn plan’s typical speed in the busy evening period, 7 pm to 11 pm. If your busiest hour is during the working day, that evening figure may not match it. Use it only as a rough guide, and ask your provider about daytime speeds. See ACCC: Broadband speeds (typical busy-period speed guidance).
Before you report it
Send these with your report
0 of 6 doneIf the internet is down rather than slow, start with Business internet down? Safe first checks instead.
Sources and further reading
- M-Lab speed test (Measurement Lab)
- ACCC: Broadband speeds (typical busy-period speed guidance)
- nbn: Network status and outage check
Checked 12 November 2026. Product menus and provider rules change; check the linked source if something looks different.